Merach MR-R14 Manual Del Usuario página 14

Assembly Instruction
Step 4: Installation of the monitor frame assembly
Take out the monitor assembly(E) and remove the 4 pre-locked screws(72) on the main stand
assembly(A) first with an Allen wrench(102). Then connect the wiring(E1) on the monitor
assembly(E) with the wiring(A1) on the main frame assembly(A); place it on the main frame
assembly(A) in the direction shown in the figure. Place it on the main frame assembly(A) in
the direction shown in the illustration; then use the four screws(72) removed to lock the
monitor assembly(E) with an Allen wrench(102).
#102 Allen wrench S4 25x60x4 S4 *1
EN
011