Merach MR-R14 Manual Del Usuario página 13

Assembly Instruction
Step 3: Install the seat assembly
First, remove the seat stop(57) and socket cap screws(77) from the end of the left and right
rear track assemblies(B/C) with an Allen wrench(101), then slide the seat assembly(D) into
the track through the direction shown in the illustration, and then lock the 2 seat stops(57)
and 2 socket cap screws(77) that have been removed back into the track and lock them in
place with an Allen wrench(101).
#101 Allen wrench S5 30×80×5 S5 *1
EN
010