Publicidad
Idiomas disponibles
Idiomas disponibles
JUMP
GB
OPERATION INSTRUCTIONS
A
OPEN THE STROLLER
1.1
Swipe(1) and then press folding button (2).
1.2
Then lift and pull the handle up (3), meanwhile open the frame (4).
1.3
Open the canopy (5).
B
FRONT WHEEL INSTALLATION
2.1
Front wheel installation: Insert the front wheel set into the slot to complete the front wheel
installation.
Front wheel disassembly: find the front wheel quick release button, press or push the sharp
object against the quick release button, then the disassembly can be completed.
2.2
Quick release button of front wheel as shown in the figure.
C
REAR WHEEL INSTALLATION
3.1
Insert the rear wheel directly into the slot to complete the rear wheel installation.Disassem-
bly of rear wheel:
Please pull the quick release button of rear wheel upward before removing the rear wheel
to complete disassembly.
3.2
Quick release button of rear wheel as shown in the figure.
D
BUMPER INSTALLATION
4.1
Simply insert the front bumper into the designated groove to complete the front bumper
installation.
Disassembly of the front bumper:
Press the quick release button on both sides of the front bumper at the same time as
shown in Figure, and then pull out the front handrail upward to complete disassembly.
4.2
The front bumper quick release button is shown in Figure.
E
FOOTREST ADJUSTMENT
5.1 Press and hold the footrest adjustment button on the left and right sides to adjust the pedal
up and down.
5.2 The pedal adjustment button as shown in the figure.
F
BACK ADJUSTMENT
6.1
When the back is lying flat, find the backrest adjusting buckle at the back of the backrest.
6.2
As shown in the figure, the backrest Angle adjustment buckle clip.
Hold the backrest adjusting buckle clip with one hand, pull the backrest adjusting ribbon up
and down to adjust, then the Angle of backrest can be raised or lowered.
6.3
Tighten the backrest adjustment clasp upward to adjust the seat. Similarly, the reverse ope-
ration will return to the flat state.
IMPORTANTE: Durante el uso, asegúrese siempre de que el freno esté activado antes de quitar
o colocar la barra de parachoques.
G
BOUCLE
7.1 Boucle: Mélanger insérer (1) et insérer (2) dans les états (4) et (5), et insérer (4) et (5) dans
(3) après l'achèvement, puis l'opération de boucle peut être terminée.
7.2 Ouvrir : Appuyez sur le bouton central de la boucle de sécurité pour relâcher la boucle de
sécurité.
7.3 Réglage de la sangle de sécurité: tenez une extrémité de la
sangle de sécurité et faites glisser la boucle de haut en bas pour ajuster la longueur de la
sangle.
16
JUMP
GB
H
BRAKE
8.1
As shown in the picture, press the brake pedal towards the rear to lock the stroller
wheel,and press the brake pedal towards the front to unlock the stroller wheel.
WARNING: The stroller must be locked when not moving.
I
LOCKING THE STROLLER
9.1
Folding the canopy (1).
9.2
Swipe button (2) and then press folding button (3).
9.3
Then just release your hand that the stroller can fold by itself (4).
9.4
Make the stroller more compact (5) & (6).
9.5
Done (7).
INFORMATION ABOUT THE GUARANTEE
- This item is guaranteed against manufacturing defects as stipulated in the legal Directives
and/or regulations in force on guarantees for consumer goods applicable to the European
Union and those of the country in which it is marketed.
- It is essential to present the purchase invoice or receipt in order to process the guarantee
through the seller of the item or, failing that, through the manufacturer.
- The guarantee excludes anomalies or faults caused by misuse, non-compliance with the
safety regulations and instructions for use and maintenance provided, or due to wear and
tear caused by normal use and regular handling of the item.
- The label containing the serial number of your model must not be torn off under any cir-
cumstances as it contains information relevant to the guarantee.
MAINTENANCE
Keep the metal parts clean and dry to prevent rusting.
Regularly grease the mobile parts and mechanisms with a silicone-based spray. Do not use oil or
grease. Only use mild detergent and warm water to clean the plastic parts.
Do not expose the upholstery to sunlight for prolonged periods of time. The upholstery can be
taken off and washed.
17
Publicidad
