Dometic Skyview Powered/Chain Instrucciones De Montaje Y De Uso página 12

Installation
8.4 Notes on connecting to AP remote control
Refer to the AP remote control manual for further instructions.
9 Installation
9.1 Fitting the blinds
A
NOTICE! Risk of damage
Consider using two people to install the product if the blind is large or
the installation location is difficult to reach alone.
➤ Proceed as shown:
– BR Powered leaflet: fig. 2 to fig. 4, BR Chain leaflet: fig. 2 to fig. 4
– MP Powered leaflet: fig. 2 to fig. 3, MP Chain leaflet: fig. 2 to fig. 3
– CA Powered leaflet: fig. 2 to fig. 3, CA Chain leaflet: fig. 2 to fig. 3
➤ Proceed as shown to remove the blinds:
– BR Powered leaflet: fig. 5, BR Chain leaflet: fig. 7
– MP Powered leaflet: fig. 4, MP Chain leaflet: fig. 6
– CA Powered leaflet: fig. 4, CA Chain leaflet: fig. 6
9.2 Fitting of the chain tidy (only chain version)
!
WARNING! Strangulation hazard
The chain must be fixed to the wall with the chain tidy in order to provide
an important safety devices to reduce the possibility of strangulation and
entanglement accidents.
➤ Proceed as shown:
– BR Chain leaflet: fig. 5 and fig. 6
– MP Chain leaflet: fig. 4 to fig. 5
– CA Chain leaflet: fig. 4 to fig. 5
9.3 Fitting the guide wire versions
➤ Proceed as shown:
– BR leaflet: fig. 6 to fig. 9, BR Chain leaflet: fig. 8 to fig. b
– MP leaflet: fig. 5 to fig. 9, MP Chain leaflet: fig. 7 to fig. a
– CA leaflet: fig. 5 to fig. 9, CA Chain leaflet: fig. 7 to fig. a
12
Skyview
EN