Publicidad
Idiomas disponibles
Idiomas disponibles
10. ANNEX. WIFI MODULE SETUP.
The WiFi module must configured in the router during the first
installation process. If the name or password of the router is
changed, the WiFi password must be configured again.
WiFi module setup.
1.
Start the inverter.
a.
Prepare a laptop computer or smartphone and activate the
b.
WLAN/WiFi connection.
Go to screen 10.2.2 SSID to identify the WiFi network
c.
name of the Inverter.
On the laptop or smartphone, search for the WiFi with the
d.
name "WiFi-AP********" and select it to connect.
Open the browser and type the address 10.10.100.254.
2.
The following screen will be displayed, enter the user name
"admin", password "admin" and click on "Login". See Fig. 40.
Fig. 42. User login.
The "System" interface will open. See Fig. 31.
3.
(1)
The * correspond to the last 8 digits of the inverter's S/N.
Fig. 43. Interface system.
78
Click on "STA Setting" to open the Interface Wi-Fi setup. If this
4.
is the first time entering the system, the screen on Fig. 32 will
be shown.
Fig. 44. WiFi setup interface.
However, if it has been previously configured, the screen
shown in Fig. 33 will appear. Click on "Scan" to display a list of
available WiFi networks.
Fig. 45. WiFi setup interface.
WiFi-AP********
(1)
Select the desired WiFi and click on "OK". It only supports
5.
2.412GHz-2.484GHz routers. See Fig. 44.
Fig. 46. Selecting the WiFi network.
SSID_router_installation
SSID_neighbour_ network_1
94:83:C4:03:1:A4
21
SSID_store_network_1
B3:F2:67:A5:21:A1
1
SSID_router_installation
C6:B4:C6:8:44:6
6
SSID_store_network_2
A6:BD:36:F8:C4:3
11
D3:FC:21:F8:35:1
4
SSID_neighbour_ network_3
43:87:05:C2:4:18
1
SSID_store_network_3
SALICRU
Publicidad
