Publicidad
Idiomas disponibles
Idiomas disponibles
14 INSTALLER 3 MENU
To access the installer 3 menu, follow the same procedure described for the installer menu; the only difference is the value of the password, which is 84.
PASSWORD = 084
Fig. 9b
Fig. 10b
WARNING The following parameters must only be modified by qualified personnel authorised to install the unit.
SETTING OPERATIONAL PARAMETERS (INSTALLER LEVEL)
Index - String
MIN value
0
0, 1 , 2, 3
∼
Index - String
MIN value
2.0V
4
48
Factory commissioning
MAX value
999
Factory commissioning
Setting maximum DCP Volt
MAX value
This parameter allows you to set the maximum speed of the fans in the CL units, the greater the value of this parame-
9.9V
ter, the higher the pressure available at fan; for an accurate setting of this parameter, please consult the table "Setting
maximum DCP Volt "the manual installation of the units CL.
Parameter function
Parameter function
Publicidad
