Initializing Bluetooth Settings; Sound Settings And Setup Menu; Changing The Sound Settings; Adjusting The Sound Characteristics - Sony MEX-BT2950 Manual De Instrucciones

Initializing Bluetooth Settings

You can initialize all the Bluetooth-related
settings from this unit.
This setting appears when turned off.
1
Press and hold (SOURCE/OFF) for 1
second to turn off the power.
2
Press and hold the select button.
The menu list appears.
3
Rotate the control dial to select "BT
INIT," then press it.
The confirmation appears.
4
Rotate the control dial to select "INIT-
YES," then press it.
"INITIAL" flashes while initializing the
Bluetooth settings.
"COMPLETE" appears when initializing has
finished.
Note
When disposing of this unit, preset numbers should be
deleted with "BT INIT."
22

Sound Settings and Setup Menu

Changing the sound settings

Adjusting the sound
characteristics
1
During reception/playback, press the
select button.
2
Press the select button repeatedly
until the desired item appears.
3
Rotate the control dial to adjust the
selected item.
The setting is complete.
4
Press (BACK).
The display returns to normal reception/play
mode.
The following items can be set (follow the page
reference for details):

EQ3

Selects an equalizer curve from 7 music types
(XPLOD, VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
LOW* 1 , MID* 1 , HI* 1 (page 23)
BAL (Balance)
Adjusts the sound balance between the left and
right speakers.
FAD (Fader)
Adjusts the relative level between the front and
rear speakers.
SUB*
2 (Subwoofer volume)
Adjusts the subwoofer volume.
AUX* 3 (AUX level)
Adjusts the volume level for each connected
auxiliary equipment: "+18dB" – "0dB" –
"– 8dB."
This setting negates the need to adjust the
volume level between sources.
BTA* 4 (Bluetooth-Audio level)
Adjusts the volume level for each connected
Bluetooth audio device: "+18dB" – "0dB" –
"– 8dB."
This setting negates the need to adjust the
volume level between sources (page 21).
*1 When EQ3 is activated.
*2 When the audio output is set to "SUB-OUT"
(page 23).
"ATT" is displayed at the lowest setting, and can be
adjusted up to 21 steps.
*3 When AUX source is activated (page 24).
*4 When Bluetooth audio source is activated
(page 21).