DeWalt XR DCF961 Manual De Instrucciones página 26

EnGLIsh
18V Max* XR 1/2" High Torque Impact Wrench with Hog Ring Anvil
DCF961
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
Power output
No load speed
Impact rate
Max tightening torque
Precision Wrench™ mode
Low Mode
Medium mode
High mode
Max breakaway torque
Weight (without battery pack)
Noise values and vibration values (triax vector sum) according to EN62841‑2‑2:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Vibration emission value a =
h
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However,
if the tool is used for different applications, with different
accessories or is poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
24
EC‑Declaration of Conformity
Machinery Directive
WALT one of the
e
Impact Wrench
DCF961
DCF961
V 18
D
DC
Data are in compliance with:
1
EN 62841-1:2015+A11:2022 and EN62841-2-2:2014.
Li‑Ion
These products also comply with Directive 2006/42/EC, 2014/30/EU
W 870
and 2011/65/EU. For more information, please contact D
min 0‑440/800/1200
‑1
the following address or refer to the back of the manual.
min ‑1 0–1890
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Nm 1496
Nm 135
Nm 1220
Nm 1626
Markus Rompel
Nm 2372
Vice-President Engineering, PTE-Europe
kg 3.5
D
65510, Idstein, Germany
12.05.2023
dB(A) 100
dB(A) 108
dB(A) 3
m/s 2 21.0
m/s 2 6.3
D
Data are in compliance with:
EN 62841-1:2015+A11: 2022 and EN 62841-2-2:2014.
These products conform to the following UK Regulations
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact D
address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
WALT declares that these products described under Technical
e
WALT, Richard-Klinger-Straße 11,
e
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008
IMPACT WRENCH
DCF961
WALT declares that these products described under Technical
e
WALT at
e
WALT.
e
WALT at the following
e
WALT.
e