Midea MBMTG925H-BK Manual Del Usuario página 21

This microwave oven uses modern electronic control to adjust cooking parameters to
meet your needs better for cooking.
Clock Setting
When the microwave oven is electrified,the oven will display "0:00", buzzer will ring
once. The oven will enter to waiting state.
1. Press "Clock/Kitchen Timer" twice, the hour figures will flash;
2. Turn " " to adjust the hour figures.the input time should be within 0--23.
3. Press "Clock/Kitchen Timer" to confirm, the minute figures will flash.
4. Turn " " to adjust the minute figures, the input time should be within 0--59.
5. Press "Clock/Kitchen Timer" to finish clock setting.
":" will flash. The current time will display.
NOTE
• If the clock is not set, it would not function when powered.
• During the process of clock setting, if you press "STOP/CLEAR" the oven will go back
to the previous status automatically.
Microwave Cooking
1. Press the "Microwave" key once, and "P100" will flash.
2. Press "Microwave" repeatedly or turn "
"P100", "P80", "P50", "P30", "P10" will display in order.
3. Press "Start/+30Sec./Confirm" to confirm setting.
4. Turn " " to adjust the cooking time. (The maximum cooking time is 95 minutes)
5. Press "Start/+30Sec./Confirm" to start cooking.
NOTE
• The step quantities for the adjustment time of the coding switch are as follow:
5---10 min : 30 seconds
10---30 min : 1 minute
30---95 min : 5 minutes
0---1 min : 5 seconds
1---5 min : 10 seconds
" to select the microwave power.
EN-19
EN