Tools and materials
Tools and materials
What's in the box
Parts supplied
Grates (3)
Burner heads (6) and
Anti-tip bracket kit
Temp. Probes (2)
Front leg covers (3)
Convection lters (3)
Griddle (1)*
* DOP48*963*D* model only.
18 English
DG68-01554A-00_IM_DOP48T960DS, DOP48T963DS_DA_EN+MES+CFR.indb 18
DG68-01554A-00_IM_DOP48T960DS, DOP48T963DS_DA_EN+MES+CFR.indb 18
Wire rack (1)
Burner caps (8)
Wok ring (1)
Gliding racks (2)
Brass burner caps (8)
Air Fry tray (1)
Small racks (2)
NOTE
•
Make sure you have received all of the supplied parts shown above.
•
If your range was damaged during shipping or you do not have all of the
supplied parts, contact your local retailer.
Parts needed
Gas line shut-off
Flexible metal
valve
appliance
connector ½" (ID)
x 5 ft
Flare union
135-degree elbow
adapter ½" (NPT) x
(optional)
½" (ID)
Tools needed
Flat-blade
Phillips
screwdriver
screwdriver
Pencil and ruler
Level
Utility knife
Soapy water
solution
Flare union
4-wire cord or
adapter ¾" or ½"
3-wire cord
(NPT) x ½" (ID)
Lag bolt or ½"
(OD) sleeve anchor
Open-end or
Pipe wrenches (2)
adjustable wrench
Pipe joint
Nut driver
compound
Drill with
/ " or / " bit
2023-07-05 오후 2:19:23
2023-07-05 오후 2:19:23