Safety Device; Use - FAR JUICY2 CI Manual De Instrucciones

English

SAFETY DEVICE

This appliance is equipped with a
safety device that prevents the motor
starting if the mixing jug is not fitted
correctly and the lid is not locked
in place. If these two conditions
have been met and your appliance
does not work, contact your retailer's
after-sales service.

USE

Place the motor unit on a flat, stable surface. Ensure that the on/off button is at the
1.
"0" position (off ).
Peel the food items, cut them into pieces and place them in the mixing jug.
2.
Then add the liquid making sure you do not exceed the maximum level indicated on
the jug (1500 m l).
Place the mixing jug on the motor unit and ensure that it locks in place (see paragraph
3.
on "Safety Device").
Place the lid on the mixing jug and turn it to lock it in place. You should hear a
4.
"click". Close the feeder flap.
opening the flap. The flap opens automatically by pressing the place marked
"PUSH".
The flap is part of the lid: do not attempt to remove it.
Plug the power cable into a mains socket.
5.
GB-6
Unlocked position
(open padlock)
NOTE: If you need to add food items while in use,
you can use the feeder flap, however, do not exceed the
maximum quantities mentioned above.
– 7 50ml for hot ingredients and liquids (at a temperature
lower than 60°C),
– 1 litre for cold liquids such as milkshakes,
smoothies etc.
It is essential that you switch the appliance off before
Locked position
(closed padlock)