SEVERIN MW-7855 Instrucciones De Uso página 26

- As a basic rule:
half the amount
double the amount
Setting the clock:
The clock uses a 12-hour display format. Once the unit has been connected to the power
supply, the display shows 1:00.
While a programme sequence is running, the present time can be called up by pressing
The clock must be set when the appliance is connected for the first time, and also if a power
failure has reset the clock.
Example: the time to be set is 15:25.
1. Press . The hour digits are displayed. (00: ) The display shows ENTER TIME
CLOCK.
2. Turn , until the present hour is displayed. (03: )
3. Press . The minute digits are displayed. ( :00)
4. Turn , until the present minute is displayed. ( :25)
5. Press to confirm.
The time is now set and the display shows 3:25 and CLOCK.
The microwave function
To programme the unit for cooking, the correct mode (microwave), the required power
setting and the cooking time must be selected, before the programme sequence can be
started. The power setting is selected by repeatedly pressing
pre-set to a maximum of 95 minutes.
Power (P)
1 x 800W
2 x 720W
3 x 640W
4 x 560W
5 x 480W
6 x 400W
7 x 320W
8 x 240W
9 x 160W
10 x 80W
11 x 0W
Example: to programme the microwave function for a cooking time of 5 minutes at 60%
- half the time recommended (for the full amount).
- almost double the time recommended.
Power settings
Display Type
P-HI (100%) High
P-90 (90%)
P-80 (80%) Medium high
P-70 (70%)
P-60 (60%) Medium
P-50 (50%)
P-40 (40%) Defrosting
P-30 (30%)
P-20 (20%) Low
P-10 (10%)
P-00 (0%)
Heating up liquids, cooking
Defrosting and heating up deep-frozen dishes
Cooking delicate food
Defrosting
Defrosting delicate food
Egg timer function
26
. The cooking time can be
.