M-Audio KEYSTATION MINI 32 MK3 Guia Del Usuario página 13

To adjust the Pitch Bend Rate:
1. Press the Edit button to engage Edit Mode and the Edit button light will illuminate to full brightness.
2. Press the "PB RATE" key (E, 3rd white key from the left).
3. Press E (10th white key from the right) to enter "1."
4. Press F (9th white key from the right) to enter "2."
5. Press D (4th white key from the right) to enter "7."
If you make an error while entering the value, press the "CANCEL" key to exit Edit Mode without making
any changes. As an alternative to steps 3 through 5, you can use the "+" and "-" buttons to change the
value.
6. Press the "ENTER" key (G, last white key on the right); the Edit light will dim to half brightness indicating
that programming is complete.
7. Press the "PB>" button while playing to hear how the Pitch Bend will occur faster than before.
The PB Rate setting is retained when the keyboard is turned off.
To return the Pitch Bend Rate to the default setting:
1. Press the Edit button. The Edit button light will illuminate to full brightness.
2. Press the "PB RATE" key (E, 3rd white key from the left).
3. Press the "DEFAULT" key (C, 8th white key from the left). The Edit light will dim to half brightness
indicating that programming is complete.
Volume Knob
To assign the Volume Knob to an effect:
1. Press the Edit button. The Edit button light will illuminate to full brightness.
2. Press the "KNOB ASSIGN" key (F#, 1st black key from the right).
3. Use the Numerical Data Entry keys (0 - 9) to enter the number of the parameter you want to assign to
the Volume Knob.
If you have made an error while entering the parameter number, you can press the "CANCEL" key (C,
first white key on the left) to exit Edit Mode without making any changes. As an alternative to step 3,
you can use the "+" and "-" buttons to change the parameter.
4. Press the "ENTER" key (G, last white key on the right); the Edit light will dim to half brightness indicating
that programming is complete.
5. Move the Volume knob clockwise to increase the parameter value.
The Volume Knob assignment is retained when the keyboard is turned off.
To return the Volume Knob to its default parameter (07 - Volume):
1. Press the Edit button. The Edit button light will illuminate to full brightness.
2. Press the "KNOB ASSIGN" key (F#, 1st black key from the right).
3. Press the "DEFAULT" key (C, 8th white key from the left). The Edit light will dim to half brightness
indicating that programming is complete.
13