M-Audio KEYSTATION MINI 32 MK3 Guia Del Usuario página 15

Sustain Mode
The Sustain button can work in two different modes called Latching and Momentary. Latching mode is the
default setting in which momentarily pressing the Sustain button and playing a note causes it to sustain
after it has been played without keeping your hands on the keyboard. However, the sound will not stop until
the button is pressed again.
Momentary mode works in the same manner as a traditional sustain pedal, such that holding the Sustain
button down and playing a note causes it to sustain until the button is released.
To change the Sustain mode from Latching to Momentary:
1. Press the Edit button. The Edit button light will illuminate to full brightness.
2. Press the "SUSTAIN MODE" key (A, 6th white key from the left). The Edit mode button will dim to half
brightness indicating that programming is complete.
Now holding the Sustain button down and playing a note will cause it to sustain until the button is released.
The Sustain Mode setting is retained when the keyboard is turned off.
To return the Sustain button to Latching mode (default):
1. Press the Edit button. The Edit button light will illuminate to full brightness.
2. Press the "SUSTAIN MODE" key (A, 6th white key from the left). The Edit mode button will dim to half
brightness indicating that programming is complete.
Now pressing the Sustain button and playing a note will cause it to sustain until the button is pressed a
second time.
15