Edit Mode - M-Audio KEYSTATION MINI 32 MK3 Guia Del Usuario

Edit Mode

Octave Buttons
By default the Octave "+" and "-" buttons are used for shifting the Keystation Mini 32 MK3 keybed up or
down one octave at a time. Whenever you power up the keyboard, the octave setting will be at the default
value of "0," and the buttons will be red in color at half-brightness.
When the "+" button is used for raising the octave it will either illuminate or flash at full-brightness based on
the octave chosen, and the "-" remains at half-brightness. Pressing the "-" button has the opposite affect,
such that it will illuminate or flash at full-brightness based on the octave chosen, while the "+" button
remains at half-brightness. The following table lists the colors used to identify each octave:
OFF
0
0
If the Octave buttons have been assigned to one of the 6 additional functions as described in "Reassigning
the Octave Buttons", you can reassign and use them for their default function (Octave) using the method
described below.
To reassign the "+" and "-" buttons to the Octave function and choose a new octave setting:
1. Press the Edit button. The Edit button light will illuminate to full brightness indicating that the keyboard
is in Edit mode.
2. Press the "DATA = OCTAVE" key (C#, first black key on the left).
The keyboard exits Edit mode as soon as the "DATA = OCTAVE" key is pressed and both Octave
buttons "+" and "-" will be red at half-brightness.
3. Press either the "+" or "-" button to raise or lower the octave.
To return to the default octave setting:
Simultaneously press the "+" and "-" buttons. Both buttons will return to red at half-brightness.
The Data=Octave assignment is retained when the keyboard is turned off.
5
GREEN ORANGE
+1
-1
RED
+2 +3
-2 -3
RED Flashing
+4
-4