Full Reset - M-Audio KEYSTATION MINI 32 MK3 Guia Del Usuario

Troubleshooting
Troubleshooting MIDI Functionality
Keystation Mini 32 MK3 has been designed to make working with MIDI on your computer as simple as
possible. However, you may experience some difficulties. In many cases, the keyboard is not at fault, as the
problem lies with the receiving device or software. To counter this, the Panic and Full Reset functions are
available to assist you.
Panic Button (All Notes Off + Reset All Controllers)
If there are notes that will not stop playing, or if you find there is an effect on a voice that you do not want,
you can send a Reset All Controllers MIDI message.
To send a Reset All Controllers message:
1. Press the Edit button to enter Edit Mode and the Edit button will illuminate to full brightness.
2. Press the "PANIC." key (D, 2nd white key from the left):
• An "All Notes off" MIDI message is sent.
• MIDI Controller 121, Value 0 and MIDI Controller 123, Value 0 is sent out on ALL MIDI Channels 1 - 16
• Edit Mode will disengage as soon as the Panic button is pressed, the Edit light will go to half
brightness indicating that programming is complete.

Full Reset

To send a Full Reset message:
1. Make sure your computer is running.
2. Switch on the Keystation Mini 32 MK3 by plugging in the USB Cable from your computer while
simultaneously holding down the Octave "+" and "-" buttons.
This will reset all Data=_____ and controller assignments to the following values:
Parameter
Program Number
Bank MSB Number
Bank LSB Number
Channel Number
Octave shift
Transpose shift
Modulation Button MIDI CC
Volume Knob MIDI CC
Pitch Bend Buttons
Octave Buttons - Assignment
Velocity
Factory Default
000
000
000
00 (channel 1)
000
000
001
007
Pitch Bend
Data = Octave
1 = Normal
16