Cleaning; Microphone; Windscreen; Specifications - AKG C 414 XLS Instrucciones De Uso

Ocultar thumbs Ver también para C 414 XLS:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 62

5.1 Microphone

5.2 Windscreen

6 Specifications

Type:
Polar patterns:
Open-circuit sensitivity:
Frequency range:
Impedance:
Recommended load impedance:
Bass cut filter slopes:
Preattenuation pads:
Equivalent noise level to IEC 60268-4:
Equivalent noise level to IEC 60268-4 (A-weighted):
Signal/noise ratio re 1 Pa (A-weighted):
Max. SPL for 0.5% THD:
Dynamic range:
Max. output level:
Environment:
Powering:
Current consumption:
Connector:
Dimensions:
Net weight:
Patents:
This product conforms to the standards listed in the Declaration of Conformity. To order a free copy of the Declaration of
Conformity, visit http://www.akg.com or contact sales@akg.com.
30

5 Cleaning

• Use a soft cloth moistened with water to clean the surface of the microphone body.
• Wash the foam windscreen in mild sudsy water. Do not use the windscreen before it
has dried completely.
1-inch large-diaphragm pressure gradient microphone
nine, selectable
23 mV/Pa (-33 dBV ± 0.5 dB)
20 to 20,000 Hz (see frequency response traces)
≤ 200 ohms
≥ 2200 ohms
12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz
-6 dB, -12 dB, -18 dB (selectable)
20 dB (0 dB preattenuation)
6 dB-A (0 dB preattenuation)
88 dB
200/400/800/1600 Pa
(0/-6/-12/-18 dB preattenuation)
134 dB min.
5 V rms (+14 dBV)
temperature: -10°C to +60°C
R.H.: 95% (+20°C); 85% (+60°C)
48 V phantom power to IEC 61938
approx. 4.5 mA
3-pin XLR (pin 2 hot)
50 x 38 x 160 mm / 2 x 1.5 x 6.3 in.
300 g / 10.6 oz.
Electrostatic transducer (patents nos. AT 395.225,
DE 4.103.784, JP 2.815.488, US 7,356,151)
140/146/152/158 dB SPL
C 414 XLS / XLII

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

C 414 xlii

Tabla de contenido