cobas Accutrend Plus Instrucciones De Uso página 25

3 If the displayed setting is correct (e.g. the
date is correct and you want to change
the time only), you can continue directly to
the next setting by pressing the Set
button or:
4 Press the M button to change the cur-
rently flashing setting. Press the M button
as often as needed (or keep it pressed)
until the desired setting (number) is
reached.
Settings with only two options (date/time
format, beeper, LAC display and unit) can
be toggled on and off with the M button.
5 Press the Set button again to confirm
(save) the current setting and go to the
next setting.
You can only move forward through the
settings. Moving backwards is not possi-
ble. Corrections can only be made by
repeating the settings.
The setting procedure can be terminated
at any time by pressing the On/Off
button . All settings made up to that
point are saved.
Meter Setup
25