Introduction; Before You Start; Intended Use; Important Information Regarding Use - cobas Accutrend Plus Instrucciones De Uso

1

Introduction

Before you start

Intended use

The Accutrend Plus meter is used for the quantitative determination of four blood parameters:
glucose, cholesterol, triglycerides, and lactate. The reflectance photometric measurement is
performed using test strips specific for each of these blood parameters. For detailed information
about each test, see the package inserts of the respective test strips.
The meter is suitable for professional use as well as for self-testing.

Important information regarding use

This manual contains all the information you need to operate and care for the Accutrend Plus
meter. Read this entire manual carefully before using the system for the first time.
Pay particular attention to the Important safety instructions and additional information section in
this chapter before you start testing. Also read the package inserts of the test strips and the
lancing device to be used.
Healthcare professionals: In addition, observe carefully the precautions and procedures
applying to professional use provided in the relevant sections of this manual.
Note: Before you use the meter for the first time (after you have first inserted the batteries),
you must set the date and time correctly to allow you to perform measurements properly.
Each time you replace the batteries you need to check (and, if necessary adjust) the date
and time.

If you need help

If you have any questions about the Accutrend Plus meter, please contact your local customer
support and service centre. You will find contact details on page 81.
Introduction
7