Description Of The Device - Waeco SinePower MSP 702 Instrucciones De Uso

SinePower
7.1

Description of the device

The inverter has the following connections, display and control elements:
No. in
fig. 2, Element
page 4
1 Main switch
0 / Off: device is switched off
I / On: device is switched on
II / Remote: Device can be turned on and off with an external switch or control-
led with a remote control (accessory)
2 The "Power Status" LED displays the operational status
3 The "Load Level" LED displays the power being supplied
4 The "Input Level" LED displays the input voltage range
5 Drill holes for securing the exhaust adapter
No. in
fig. 3, Element
page 4
1 DIP switch for switching to energy-saving mode
2 Fuse
3 230 Vw input jack
4 230 Vw output jack
5 Earth terminal
6 Remote Port II for connecting a remote control (accessory)
7 Remote Port I for connecting to an external switch, for turning the device on
and off
8 DC terminal (positive pole)
9 DC terminal (negative pole)
EN
Technical description
41