Waeco SinePower MSP 702 Instrucciones De Uso página 37

SinePower
Electrical cables
 If cables have to be fed through metal walls or other walls with
!
sharp edges, use ducts or wire bushings to prevent damage.
 Do not lay cables which are loose or bent next to electrically
conductive material (metal).
 Do not pull on the cables.
 Do not lay the 230 V mains cable and the 12/24 Vg cable in the
same duct.
 Fasten the cables securely.
 Lay the cables so that they cannot be tripped over or damaged.
2.3 Operating the appliance safely
 Operate the device only if you are certain that the housing and
!
the cables are undamaged.
 Make sure the air inlets and outlets of the device are not cov-
ered.
 Ensure good ventilation.
 Do not connect the 230 V output of the inverter (fig. 3 4,
page 4) to a different 230 V source.
 Even after the fuse triggers, parts of the inverter remain live.
 Always disconnect the power supply when working on the de-
vice.
EN
Safety instructions
37