Installer Mode - S&P CADB-N TERMO-REG 05 Instrucciones De Uso

10.2. INSTALLER MODE

To modify advanced parameters requires access to the installer menu. It is possible modify the fo-
llowing parameters:
Parameters
Reference temperature
Temperature range
Maintenance period
Air quality sensor
ppm settings of sensor air quality
On/Off remote function
Boost
10.2.1. Access to the installer menu (Modifi cation of default parameters)
With the unit off, press the FAN button for 15 seconds. When you have heard 6 « Beeps » by
holding the FAN button, simultaneously press the ON/OFF button. This will access the installer
menu "installer".
10.2.1.1. Navigating the different parameters
The parameter to be modifi ed is identifi ed by the combination of the LED indicator that shows
the temperature level. The current set parameter is indicated by the number of fl ashes
showing the status LED
Factory setting
Supply
20/23/26°C
6000 h
NO
1000 ppm
On/Off Remote
.
48
Possible settings
Supply
Room
Extraction
17/20/23°C
20/23/26°C
23/26/29°C
3000 h
6000 h
9000 h
NO
YES
800 ppm
1000 ppm
1200 ppm
On/Off remote
Boost