Specifications - Vox VT20X Manual De Usuario

1. Hold down the TAP button to bypass the effects (the tuner function
is turned on).
2. Turn the VALUE 1 knob to adjust the sensitivity of noise reduction.
Turn the knob to the right to increase the noise-reducing effect. When
this knob is fully turned to the left, noise reduction is turned off.
Depending on your guitar, increasing the sensitivity of noise
reduction too much may cause interruptions in the sound.
3. Press the TAP button to cancel bypass.
Global noise reduction setting
The noise level changes depending on the guitar being used, the power
supply and other external factors. When the operating environment
is changed, overall adjustments can be made while maintaining the
different sensitivities specified for each program.
This setting does not affect programs in which noise reduction has
been turned off.
1. While holding down the TAP
button, turn on the amp.
The illumination of the effect selection
buttons shows the current setting.
2. Press the TAP button or turn the
VALUE 1 knob to change the setting.
3. Wait without performing any operation for a few seconds. The setting
is applied, and the amp automatically returns to normal operation.

Specifications

Number of amp models: 11 (20 when using Editor/Librarian software)
Number of effects
PEDAL1 types: 4
PEDAL2 types: 4
Reverb type: 4
Noise reduction: 1
Number of programs
Preset:
User:
Input/output jacks:
Power amp output
VT20X:
VT40X:
Speaker
VT20X:
VT40X:
Signal processing
A/D conversion:
D/A conversion:
Power supply
VT20X:
Low
VT40X:
Current consumption
Medium
VT20X:
High
VT40X:
Dimensions (W x D x H)
VT20X:
VT40X:
Weight
VT20X:
VT40X:
Included items:
Options (sold separately): VOX VFS5 foot switch
• Specifications and appearance are subject to change without notice for
improvement.
- 13 -
VT20X/VT40X Owner's manual
Number of amp models: 33 (60 when using
Editor/Librarian software)
8 (two banks x four channels)
INPUT jack, AUX IN jack, Headphones
jack, FOOT SW jack, USB (Type B) port
Maximum approx. 20 W RMS @ 5 ohms
Maximum approx. 40 W RMS @ 5 ohms
8" 5 ohms
10" 5 ohms
24-bit
24-bit
AC adapter jack (DC 12V
AC adapter jack (DC 19V
2.50A
3.42A
410 × 225 × 347 mm / 16.14 × 8.86 × 13.66 inches
462 × 225 × 404 mm / 18.19 × 8.86 × 15.91 inches
7.3 kg / 16.09 lbs
9.5 kg / 20.94 lbs
AC adapter, owner's manual
)
)