Philips MARCILLA SENSEO HD7872 Manual Del Usuario página 12

Press the 1-cup button to make the coffee
3
flow into the cup (1). When the cup contains
the amount of coffee you prefer, press the
1-cup button again (2). Your preferred amount
of coffee has been set.
From now on, your SENSEO
or two cups with this amount of coffee when you
select the personal coffee memory symbol with
the selection button.
Note:
D
If you want to change the set amount of coffee,
simply perform steps 1-4 again.
5.2 Flushing the machine after
a day of non-use
If you have not used the coffee machine for one
day, flush it to make sure that the boiler is filled
with fresh water.
To flush the machine, brew two cups of hot
water in the following way:
12
machine brews one
®
Fill the water reservoir with cold tap water
1
beyond the MIN level (1). Put the lid on it (2)
and put it the water reservoir back onto the
machine.
Put the 1-cup pod holder q or the 2-cup pod
2
holder qq in the machine without pods.
Close the lid and lock the lever.
3
Put two cups or a large mug under the coffee
4
spout to collect the water.