Electrical Connection - Beem Air Joy Hot & Cool Manual De Instrucciones

EN
Place the appliance on a firm,
■
dry, flat and waterproof surface.
Do not install the appliance in a
■
hot, wet or very humid environ-
ment.
Never place the appliance or
■
parts of the appliance in the
vicinity of strong heat sources
and hot surfaces (e.g., heating,
oven, grill).
Do not place the appliance in a
■
confined, in an alcove, corner
or constricted between items of
furniture. Allow sufficient space
around it so that the air can cir-
culate.
The mains socket must be eas-
■
ily accessible and allow fast
disconnection in the event of an
emergency.
The surface finishes on furni-
■
ture may contain substances
that can be detrimental to the
feet of the appliance. If neces-
sary, place a mat under the feet
of the appliance.
The appliance may not be used
■
or stored outdoors.

Electrical connection

For safe and trouble-free operation
of the appliance, the following in-
structions on the electrical connec-
tion must be be observed:
BEEM - Elements of Lifestyle
Air Joy Hot & Cool
Before connecting the appli-
■
ance, compare the connection
data (voltage and frequency)
on the rating plate with those of
your mains power supply. This
data must correspond in order
to avoid damage to the appli-
ance. If in doubt, ask your elec-
trical appliance retailer.
The mains socket must be pro-
■
tected by at least a 16 A fuse.
Ensure that the mains cable is
■
undamaged and is not laid over
sharp edges.
The mains cable must not be
■
pulled tightly, bent, crushed or
knotted or come into contact
with hot surfaces sharp edges
or chemicals.
Always unwind the mains lead
■
completely before connect-
ing the appliance to the plug
socket.
Route the mains cable to pre-
■
vent risk of tripping.
19