Argo LILIUM 11 Instrucciones De Uso página 20

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

LED
DISPLAY
Shows the relative humidity setting.
TIMER LED
Shows the timer setting.
TANK FULL LED
When the tank is full, the TANK FULL LED lights on and the dehumidifier stops running. A 10 second beep sounds.
Remove the tank and empty it (as indicated in "HOW TO ELIMINATE CONDENSATION"), then restore it; the
dehumidifier will start running again.
When the tank is not correctly positioned, the unit will sound a beep lasting approximately 10": then the LED will turn on.
Reposition the tank correctly..
DEFROST LED
The dehumidifier is designed to operate at ambient temperatures from + 5°C to + 32°C.
If it is operated at low temperatures, ice may form on the evaporator, degrading its operation.
When this happens the dehumidifier goes into defrost mode and the defrost LED lights on. The compressor stops, but the
fan continues running.
We recommend not using the dehumidifier in room temperatures lower than 5°C.
CHILD LOCK LED
To disable the buttons, press the "+" and "-" buttons for 3 seconds: the LC symbol will appear on the display and the unit
will sound a beep. To reactivate the control panel, press the "+" and "-" buttons again for 3 seconds.
FAN SPEED LED
Shows the fan speed: HIGH or LOW.
OPERATION LED
You can select one of the following dehumidification modes: the corresponding LED will turn on.
DEHUMIDIFY mode: the compressor is workable and the fan speed is adjustable. The initial humidity is 55%, low
speed. Humidity range is 30%-80% adjustable.
AUTOMATIC mode: the compressor is workable and the fan speed is un-adjustable. The initial humidity is 55% and
can't be set. Fan speed is automatic. If the humidity is higher than 70%, the compressor is working and the fan
speed is high. If the humidity is between 55% and 70%, the compressor is working and the fan speed is low. If the
humidity is less than 55%, the compressor stops working and the fan speed is low.
CONTINUOUS mode: the compressor runs continuously and the fan speed is low.
FAST DRY CLOTHES mode: the compressor runs continuously and the fan speed is high.
FAN modes: the compressor isn't working and the fan speed is adjustable.
MODE
COMPRESSOR
Fan
NO
Dehumidify
YES
Automatic
YES
Continuous
YES
Fast Dry
YES
clothes
LED COLOR:
The front LED under the control panel changes colour in according to the humidity level in the room:
- When the room humidity is lower than 50% (<=), the led light is BLUE.
- When the room humidity is between 50% to 70%, the led light is GREEN.
- When the room humidity is higher than 70% (>=), the led light is RED.
AUTO RESTART: the dehumidifier starts up again after a power failure.
V 06/17
FAN SPEED
DEFROST
Adjustable
NO
Adjustable
YES
Adjustable
YES
Low
YES
High
YES
TIMER
TANK FULL
ALARM
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
HUMIDITY
SETTING
NO
YES
NO
NO
NO
20

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Lilium 13

Tabla de contenido