Abicor Binzel MF1-Rear Instructivo De Servicio página 35

Ocultar thumbs Ver también para MF1-Rear:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

MF1-Rear
Check the following:
Weekly
• Remove the cover (1) and use dry compressed air to clean the
drive unit.
• Check the drive gear (6) for wear and replace if necessary.
• Check the full-floating axles (10) and toothed wheels (11) for
wear and replace if necessary.
• Check the feed rollers for wear and replace if necessary.
 6.1 on page EN-8
Tab. 9
Maintenance and cleaning
BAL.0410.0 • 2018-08-15
9 Maintenance and cleaning
Every other week
Monthly
• Lightly lubricate the
• Check the contact
full-floating
pressure setting and
axles (10) and
correct using the
toothed wheels (11)
pressure screw (8) if
with: K3N-30
necessary.
Lithium NL GI
class 3
• Check the wire
• Check the pressure
guide nipple (7) for
spring (9) for wear
wear and replace if
and replace as
necessary.
follows if necessary:
Unscrew the pressure
• Check the wire
screw (8), replace the
outlet nipple (3) for
pressure spring (9)
wear and replace if
and screw in the
necessary.
pressure screw (8).
• Check the clamp
lever (2) for wear and
replace if necessary.
EN - 17

Publicidad

Tabla de contenido
loading

Tabla de contenido