Cameo ROOT PAR 4 Manual De Usuario página 10

Spotlight (group) 0
No delay
DMX -------Delay-------
Controller
Group
DMX Delay
by DMX?
0.5 s
STANDALONE MODE AUTO/SOUND
The 6 available auto-programmes each comprise non-editable color-change sequences. Brightness, speed, music-control with microphone
sensitivity and delay (signal delay) are separately adjustable in each programme.
Starting from the main display, press MODE to enter the main menu. Now use UP and DOWN to select the menu item Stand Alone and
confirm with ENTER. Again use UP and DOWN to select standalone mode Auto and confirm with ENTER. Now use the UP and DOWN to
select the desired programme (programme 1 to 6) and confirm with ENTER.
--------Menu------- ----Stand Alone----
DMX Address
Auto
DMX Mode Static
DMX Delay
Color Preset
Stand Alone User Color
Slave
Loop
Settings
System Info
This will take you to the submenu for setting the submenu items (see table, select with UP and DOWN, confirm with ENTER, change value
or status with UP and DOWN, confirm with ENTER). The settings for each programme are made separately and are retained even after
restarting the device.
STANDALONE MODE AUTO/SOUND (PROGRAMME 1 to PROGRAMME 6)
Dimmer Sets brightness
Speed Sets running speed
Sound Activates/deactivates music-control
Sens Sets microphone sensitivity
Delay Delay time for slave groups
10
Spotlight (group) 1 Spotlight (group) 2
0.5 s delay
-------Delay------- -------Delay-------
0 Group 1 Group
Yes by DMX? Yes by DMX?
----Auto Mode---- -----Program x-----
Program 1 Dimmer
| Speed
Program 6 Sound
Sens
Delay
Spotlight (group) 3
1 s delay 1.5 s delay
-------Delay-------
2 Group
Yes by DMX? Yes
-------Delay-------
Group
by DMX? No
-------Delay-------
Group
by DMX? Yes
0 - 100
0 - 100
Off / On
0 - 100
0.0s - 2.0s
0–100
0–100
Off
On
0–100
0.0 s to 2.0 s
Spotlight (group) 4 Spotlight (group) 5
2 s delay 2.5 s delay
-------Delay------- -------Delay-------
3 Group 4 Group
by DMX? Yes by DMX?
3
3
Deactivates music-control
Activates music-control
5
Yes