Peavey Escort 3000 Manual Del Usuario página 25

MEDIA:
Playback from Media Source
Hook up your media source device as mentioned previously. When using RCA jacks
for a CD player, record player, or tape machine make sure the button is in the raised
position so these jacks are active (Fig.15). Which inputs are active will also be
displayed on the screen in the master section. Use the controls on the source device
for play, stop, forward and reverse functions. Adjust channel 7 controls on the Escort
mixer for desired sound. For media playback using an MP3 player, smartphone, or
other similar device make sure the button stays in the raised position. Connect
using a stereo 3.5mm cable mentioned previously and use the source device for
playback controls. When a device is connected to the 3.5mm jack the RCA jacks are
automatically disabled. For MP3 or audio file playback from a USB memory stick, make
sure the button is in the down position (Fig.16) so the USB plug is active.
NOTE: The Escort does not allow playback through multiple media inputs
simultaneously.
With your USB device attached, use the MEDIA SELECT knob (Fig.17) to navigate
through your audio files. Once the desired file is displayed on the screen press the
MEDIA SELECT knob to cue that file. Use the controls on the mixer for play, pause,
forward and reverse. If you do not choose to navigate or select a certain file the Escort
will play the files in the order they are stored on your USB memory device.
Non-audio files will show up in your navigation but will have no audio playback if
selected. Only audio files can be selected for playback.
Supported Audio File Types
.WAV
.MP3
.WMA