Dust Collection; Protecting The Environment - Black+Decker BR318 Manual De Instrucciones

DUST COLLECTION

Warning! Fire hazard. Collected sanding dust from
sanding surface coatings (polyurethane, linseed oil,
etc.) can self-ignite and cause fire. To reduce risk,
strictly follow sander manual and coating manufacturer's
instructions.
Warning! Fire hazard. When sanding wood
that could contain nails or when sanding metal
surfaces, do not use a vacuum cleaner because
sparks are generated. Use safety glasses and a dust
mask. Due to the danger of fire, do not use your sander to
sand magnesium surfaces. Do not use for wet sanding.
MAINTENANCE
Never apply excessive force when you use your belt
sander. Too much force can result in an overload and
cause damage to the motor or the workpiece. If your belt
sander becomes too hot, operate it without load for 2 min.
Always keep the air cooling vents clear. To clean your belt
sander, proceed as follows:
Warning! To prevent accidental operation, turn off and
unplug sander before performing the following operations.
Failure to do this could result in serious personal injury.
f Use a clean dry paint brush to clear vents and ducts.
f Clean the housings using a clean damp cloth
(do not use solvents, gas or turpentine.)
Important! To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (other than those
listed in this manual) should be performed by authorized
service centers or other qualified service personnel,
always using identical replacement parts.
ACCESSORIES
Recommended accessories for use with your tool
are available at extra cost from your local dealer or
authorized service center. If you need assistance in
locating any accessory for your tool, please cal contact
your nearest Service Center.
Caution! The use of any other accessory not
recommended for use with this tool could be hazardous.

PROTECTING THE ENVIRONMENT

Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your
BLACK+DECKER product needs replacement, or
if it is of no further use to you, do not dispose of it
with household waste. Make this product available
for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
SPECIFICATIONS
Power
Voltaje
AR, B2C
B3
No-load speed
Belt tracking
ENGLISH • 13
BR318
680W
220V ~ 50Hz
120V ~ 60Hz
660 ft/min (200 m/min)
Automatic