TECshow CUBEX 360 Manual De Usuario página 3

2. Introduction
Thank you for having chosen this professional
moving head. You will see you have acquired a
powerful and versatile device.
Unpack the device. Inside the box you should find:
1. One DMX connection cable
2. One quick lock handle
3. One safety rope
4. One use manual
5. One power cable
3. Safety and maintenance
Information
•
This device has left the factory in perfect condi-
tion. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessa-
ry for the user to follow the safety instructions
and warning notes written in this user manual.
•
Damages caused by the disregard of this user
manual are not subject to warranty. The dealer
will not accept liability for any resulting defects
or problems.
•
If the device has been exposed to temperature
changes due to environmental changes, do not
switch it on immediately. The arising condensa-
tion could damage the device. Leave the device
switched off until it has reached room temperature.
•
Please make sure that the device be earthed.
•
Please replace housing if it is broken. This fixture
can be using after finished installed.
•
The electric connection must carry out by qualified person.
•
Make sure that the available voltage is not higher
than stated at the end of this manual.
•
Make sure the power cord is never crimped or
damaged by sharp edges. If this would be the
case, replacement of the cable must be done by
an authorized dealer.
P. 3
CUBEX 360
ENGLISH VERSION