Getting Started - Kenwood KDC-DAB34U Manual De Instrucciones

GETTING STARTED

1
Select the display language and cancel the demonstration
When you turn on the power (or after you reset the unit), the display
shows: "SEL LANGUAGE" "PRESS" "VOLUME KNOB"
1 Turn the volume knob to select [ENG] (English) or [RUS] (Russian), then
press the knob.
[ENG] is selected for the initial setup.
Then, the display shows: "CANCEL DEMO" "PRESS"
"VOLUME KNOB"
2
Press the volume knob.
[YES] is selected for the initial setup.
3 Press the volume knob again.
"DEMO OFF" appears.
2
Set the clock
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [CLOCK], then press the knob.
3 Turn the volume knob to select [CLOCK ADJUST], then press the knob.
4
Turn the volume knob to make the settings, then press the knob.
Day Hour Minute
5 Turn the volume knob to select [CLOCK FORMAT], then press the knob.
6
Turn the volume knob to select [12H] or [24H], then press the knob.
7
Press and hold to exit.
To return to the previous setting item or hierarchy, press
4
While in clock display screen...
Press and hold DISP SCRL to enter clock adjustment mode
directly.
Then, perform step
3
Set the initial settings
1 Press B SRC to enter STANDBY.
2
Press the volume knob to enter [FUNCTION].
3 Turn the volume knob to make a selection (see the following table),
then press the knob.
4 Press and hold
To return to the previous setting item or hierarchy, press
AUDIO CONTROL
SWITCH PREOUT REAR/ SUB-W: Selects whether rear speakers or a subwoofer are
connected to the line out terminals on the rear (through an external
amplifier).
SP SELECT OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size (5 inches
or 4 inches, 6×9 inches or 6 inches) or OEM speakers for optimum
performance.
DISPLAY
EASY MENU
(For
ON: Both display and button illumination change to white color when
entering [FUNCTION]. ; OFF: Both display and button illumination
remain as [COLOR SELECT] color. ( 12)
.
4
to set the clock.
to exit.
KDC-DAB34U
)
.
Default: XX