Assembly/Disassembly And Adjustments - Vermeiren Goliat Manual De Instrucciones

EN
NL
4 Assembly/disassembly and
adjustments
CAUTION
Assemble the rollator completely, before
adjusting its height.
4.1 Assembly
4.1.1 Mounting the front and rear wheels
CAUTION
Always set the four wheels to the same
height.
When mounting the rear wheels,
check
connection (4) is positioned to the
inside of the rollator.
1. Put the rollator on the front/back.
2. Press and hold the spring button (1) on
the wheel support.
3. Slide the wheel support (2) into the
frame tube (3) until the spring button
pops out of the desired adjustment
hole.
4. Repeat for the other wheels. Make
sure that all four wheels are well
secured.
1
3
4
Risk of injuries
Risk of falling or
tipping over
that the brake
2
4.1.2 Mounting the handgrips
1. Place the rollator on four wheels. Make
sure that it is standing stable.
2. Push and hold the spring button (5) on
the handgrip.
3. Slide the handgrip into the frame tube
(6) until the spring button pops out of
the desired adjustment hole.
4. Repeat for the second handgrip. Make
sure that both handgrips are well
secured, and that they are set to the
same height.
cable
Cable clamps
To prevent the cable from being trapped
between moving parts of the rollator,
secure the brake cable to the frame using
the cable clamp (7).
1
3
2
4

Assembly/disassembly and adjustments

6
Goliat
2019-03
5
7