Buchi Rotavapor R-300 Manual De Instrucciones página 89

BÜCHI Labortechnik AG
Manual de instrucciones Rotavapor® R-300
Glassware
Glass assemblies
Glass assembly V. Vertical condenser, 1500cm2
For standard distillations, used with recirculating chiller or tap water.
Features: Cleaning hole on top. Content: 1 L receiving flask, required
tubings, ball joint clamp, stopcock, feeding tubing. Not inclusive:
Evaporating flask, vapor duct, vacuum gasket, holder.
Glass assembly A. Diagonal condenser, 1500cm2, P+G
For standard distillations, used with recirculating chiller or tap water.
Features: Cleaning hole on top. Content: 1 L receiving flask (P+G),
required tubings, ball joint clamp, stopcock, feeding tubing. Not
inclusive: Evaporating flask, vapor duct, vacuum gasket, holder.
Glass assembly BY. Vertical intensive condenser, reflux,
1300cm2, P+G
For particularly efficient condensation with double jacket condenser as
well as for reflux distillations with distributor and shut-off valve. Used
with recirculating chiller or tap water. Features: Double jacket
condenser. Additional joint on top of the condenser for flexible
expansion (SJ29/32). Connection for vapor temperature sensor.
Content: 1 L receiving flask, required tubings, ball joint clamp,
stopcock, feeding tubing, distributor. Not inclusive: Evaporating flask,
vapor duct, vacuum gasket, holder.
Glass assembly BY. Vertical intensive condenser, reflux,
1300cm2, P+G
For particularly efficient condensation with double jacket condenser as
well as for reflux distillations with distributor and shut-off valve. Used
with recirculating chiller or tap water. Features: Double jacket
condenser. Additional joint on top of the condenser for flexible
expansion (SJ29/32). Connection for vapor temperature sensor.
Content: 1 L receiving flask (P+G), required tubings, ball joint clamp,
stopcock, feeding tubing, distributor. Not inclusive: Evaporating flask,
vapor duct, vacuum gasket, holder.
Glass assembly C. Cold trap, 500cm2
For distillations of low-boiling point solvents. No need of cooling liquid,
but e.g. dry ice. Content: 1 L receiving flask, ball joint clamp, stopcock,
feeding tubing. Not inclusive: Evaporating flask, vapor duct, vacuum
gasket, holder.
Glass assembly C. Cold trap, 500cm2, P+G-LT
For distillations of low-boiling point solvents. No need of cooling liquid,
but e.g. dry ice. Application temperature: -70 to 40°C. Content: 1 L
receiving flask (P+G-LT), ball joint clamp, stopcock, feeding tubing. Not
inclusive: Evaporating flask, vapor duct, vacuum gasket, holder.
Glass assembly CR. Cold trap reflux, 500cm2
For reflux distillations with distributor and shut-off valve as well as for
distillation of low-boiling point solvents. No need of cooling liquid, but
e.g. dry ice. Content: 1 L receiving flask, ball joint clamp, stopcock,
feeding tubing, distributor. Not inclusive: Evaporating flask, vapor duct,
vacuum gasket, holder.
Anexo | 10
048168
048169
048176
048297
040640
040642
048292
89/102