Installation And Connections; Parts For Installation And Connections - Sony XM-GS6DSP Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

MID/REAR (midrange/rear speaker) section:
 FILTER switch
Selects "HPF" (high-pass filter) or "HPF+LPF"
(high-pass and low-pass filters) according to the
speaker system.
 LOW PASS FILTER control
Adjusts the cut-off frequency (500 Hz – 4 kHz).
 HIGH PASS FILTER control
Adjusts the cut-off frequency (50 Hz – 500 Hz).
 LEVEL control
Adjusts the input level (0.3 V – 6 V). Turn it
clockwise when the output level of the audio
device seems low.
WOOFER/SUBWOOFER (woofer/subwoofer)
section:
 LOW PASS FILTER switch
Turns the low-pass filter on/off.
 LOW PASS FILTER control
Adjusts the cut-off frequency (50 Hz – 500 Hz).
 LOW BOOST control
Boosts the frequencies around 40 Hz to a
maximum of 10 dB (0 dB – 10 dB).
 LEVEL control
Adjusts the input level (0.3 V – 6 V). Turn it
clockwise when the output level of the audio
device seems low.
 LINE INPUT connector
 HIGH LEVEL INPUT connector
 REMOTE IN jack
For a wired remote control (not supplied)
SPEAKER OUT section:
 TWEETER/FRONT/MID/REAR connector
 WOOFER/SUBWOOFER terminals
POWER section:
 Fuse (30 A)
 ACC (accessary) terminal
+12V terminal
GND (ground (earth)) terminal
6
GB

Installation and Connections

Parts for Installation and
Connections
ø5 × 20 mm
(
7
/
×
13
/
in)
32
16
× 4
This parts list does not include all the package
contents.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido