function
Bus to Stereo LIB STORE
0x29
Surround Monitor LIB STORE
0x2A 1-32
AUTOMIX LIB STORE
0x2B
*1) 0:CH1 - 55:CH56, 128:BUS1 - 135:BUS8, 256:AUX1 -
263:AUX8, 512:STEREO L - 513:STEREO R
Use 256 if the recall destination or store source is a single data
item.
Effect is 0:Effect1 - 3:Effect4
If the store destination is 16383 (0x3FFF), this indicates that the
library data has been changed by a external cause (such as bulk
reception) (only transmitted by the 02R96)
*2) This is also transmitted when a program that is not assigned in
the [Program Change Table] is recalled. (Normally, it is trans-
mitted by Program Change messages.)
*3) Varies with the firmware version.
13.4.15 Parameter change
Reception
If [Parameter change RX] is ON and the [Rx CH] matches the Device
Number included in the SUB STATUS, these messages are received. If [Pa-
rameter change ECHO] is ON, these messages are echoed.
When this is received, the title of the specified memory/library will be
changed.
Transmission
In response to a request, a Parameter Change message will be transmitted
on the [Rx CH].
If [Parameter change ECHO] is ON, this message will be retransmitted
without change.
STATUS
11110000 F0
ID No.
01000011 43
SUB STATUS 0001nnnn 1n
GROUP ID
00111110 3E
MODEL ID
01111111 7F
ADDRESS
00010000 10
0100ffff 4f
0mmmmmmm mh
0mmmmmmm ml
DATA
0ddddddd dd
:
:
:
0ddddddd dd
EOX
11110111 F7
function
SCENE LIB TITLE
0x40
EQ LIB TITLE
0x41
GATE LIB TITLE
0x42
COMP LIB TITLE
0x43
EFF LIB TITLE
0x44
CHANNEL LIB TITLE
0x46
INPATCH LIB TITLE
0x47
OUTPATCH LIB TITLE
0x48
Bus to Stereo LIB TITLE
0x49
Surround Monitor LIB TITLE 0x4A 0-32 (0:response only)
AUTOMIX LIB TITLE
0x4B
* Varies with the firmware version.
13.4.16 Parameter request
Reception
If [Parameter change RX] is ON and the [Rx CH] matches the Device
Number included in the SUB STATUS, these messages are received. If [Pa-
rameter change ECHO] is ON, these messages are echoed.
When this is received, a Parameter Change message will be transmitted on
the [Rx CH].
Refer to the above table for the Functions and Numbers.
STATUS
11110000 F0
ID No.
01000011 43
SUB STATUS 0011nnnn 3n
GROUP ID
00111110 3E
MODEL ID
01111111 7F
ADDRESS
00010000 10
number
channel*1)
rx/tx
1-32
256, 16383
rx/tx
256, 16383
rx/tx
1-16
256, 16383
rx/tx
(Function call: title)
System exclusive message
Manufacture's ID number (YAMAHA)
n=0-15 (Device number=MIDI Channel)
MODEL ID (digital mixer)
Universal
Function call
title
number High
number Low
title 1
title x (depend on the library)
End of exclusive
number
size
0-99,256 (0:response only)
16
1-200 (1-40:response only)
16
1-128 (1-4:response only)
16
1-128 (1-36:response only)
16
1-128 (1-xx(*):response only)
16
0-128 (0-1:response only)
16
0-32 (0:response only)
16
0-32 (0:response only)
16
0-32 (0:response only)
16
16
1-16
16
(Function call: title)
System exclusive message
Manufacture's ID number (YAMAHA)
n=0-15 (Device number=MIDI Channel)
MODEL ID (digital mixer)
Universal
Function call
Format Details
0100ffff 4f
number High
TITLE
0mmmmmmm mh
number Low
0mmmmmmm ml
End of exclusive
EOX
11110111 F7
13.4.17 Parameter change
(Function call: scene/library clear)
Reception
If [Parameter change RX] is ON and the [Rx CH] matches the Device
Number included in the SUB STATUS, these messages are received. If [Pa-
rameter change ECHO] is ON, these messages are echoed.
When this is received, the specified memory/library will be cleared.
Transmission
If [Parameter change ECHO] is ON, this message will be retransmitted
without change.
System exclusive message
STATUS
11110000 F0
Manufacture's ID number (YAMAHA)
ID No.
01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0001nnnn 1n
MODEL ID (digital mixer)
GROUP ID
00111110 3E
Universal
MODEL ID
01111111 7F
Function call
ADDRESS
00010000 10
clear function
0110ffff 6f
number High
0mmmmmmm mh
number Low
0mmmmmmm ml
End of exclusive
EOX
11110111 F7
function
SCENE LIB CLEAR
EQ LIB CLEAR
GATE LIB CLEAR
COMP LIB CLEAR
EFF LIB CLEAR
CHANNEL LIB CLEAR
INPATCH LIB CLEAR
OUTPATCH LIB CLEAR
Bus to Stereo LIB CLEAR
Surround Monitor LIB CLEAR
AUTOMIX LIB CLEAR
* Varies with the firmware version.
13.4.18 Parameter change
Reception
If [Parameter change RX] is ON and the [Rx CH] matches the Device
Number included in the SUB STATUS, these messages are received. If [Pa-
rameter change ECHO] is ON, these messages are echoed.
When this is received, pairing will be enabled/disabled for the specified
channel. (Otherwise, these messages are reserved for future use.)
System exclusive message
STATUS
11110000 F0
Manufacture's ID number (YAMAHA)
ID No.
01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0001nnnn 1n
MODEL ID (digital mixer)
GROUP ID
00111110 3E
Universal
MODEL ID
01111111 7F
Function call Pair
ADDRESS
00010001 11
function
0000ffff 0f
Source channel H
0sssssss sh
Source channel L
0sssssss sl
Destination channel H
DATA
0ddddddd dh
Destination channel L
0ddddddd dl
End of exclusive
EOX
11110111 F7
function
PAIR ON with COPY
PAIR ON with RESET BOTH
PAIR OFF
*1) 0:CH1 - 95:CH96, 128:BUS1 - 135:BUS8, 256:AUX1 -
267:AUX12
• In the case of PAIR, you must specify channels for which pairing
is possible.
• In the case of PAIR ON with COPY, you must specify Source
Channel as the copy source, and Destination Channel as the
copy destination.
02R96 Version 2—Manual de Instrucciones
337
number
0x60
1-99
0x61
41-200
0x62
5-128
0x63
37-128
0x64
xx(*)-128
0x66
2-128
0x67
1-32
0x68
1-32
0x69
1-32
0x6A 1-32
0x6B
1-16
(Function call: pair)
channel
0x00
*1)
0x01
*1)
0x02
*1)