Abbott FreeStyle Lite Manual Del Usuario página 30

6.
View result.
The result appears on the display when the test is complete.
(Example only)
7.
Compare the control solution result to the range printed on the test strip vial.
The result should fall within the range.
Note: If you see an "Er1, Er2, Er3, or Er4" on the display, it is an error code. Go to
Error Codes section.
8.
Press and hold
result as a control solution result. To unmark a control solution test result, press
and hold
this reading as a control solution test.
(Example only)
9.
Remove the test strip to turn meter off.
c
for 2 seconds until
c
for 2 seconds. A value with the
appears on the display to mark the
indicates you have marked
26