General Power Tool Safety Warnings - Makita XCS04 Manual De Instrucciones

ENGLISH
(Original instructions)
1. Red indicator
2. Button
3. Battery cartridge
4. Star marking
5. LED indicator
6. Switch Lock
7. Switch trigger
8. Side A
9. Side B
SPECIFICATIONS
Max. Cutting Capacity (Dia.mm)
Grade 40 - Grade 60
Grade 40: Tensile Strength 490 N / mm
Grade 60: Tensile Strength 620 N / mm
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2014
Applicable battery cartridge
BL1830 / BL1830B / BL1840B / BL1850B / BL1860B
• Some of the battery cartridges listed above may not be available depending on your region of residence.
WARNING:
• Only use the battery cartridges listed above. Use of any other battery cartridges may cause injury and/or fire.
General power tool safety
warnings
WARNING:
Read all safety warnings, instructions, illustrations
and specifications provided with this power tool.
Failure to follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
4
Explanation of general view
10. Protector
11. Rebar
12. Blades
13. Stopper
14. More than 200 mm
15. Air Hole
16. Hex Wrench
17. Return Valve
18. Blade A (Thicker Blade)
Model
2
70,000 PSI
2
90,000 PSI
Cutting speed
Overall length
Net weight
Rated voltage
19. Blade B (Thinner Blade)
20. Bolt (Longer)
21. Bolt (Shorter)
22. Washer
23. Bar Holder
24. Cutter Rod
25. Blade A on Bar Holder
26. Blade B on Cutter Rod
27. Spare Blades
360 mm (14-11/64")
6.9 kg (15.2 lbs)
3. Keep children and bystanders away while
operating a power tool. Distractions can cause you
to lose control.
Electrical Safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet
conditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
XCS04
16 mm (5/8")
2.8 seconds
D.C. 18 V