Magnetrol Jupiter JM4 Manual De Instalación Y Operación página 21

1.5.6 Menú de Configuración del Modelo JM4 – Ajustes de Dispositivo
Home Screen
Main Menu
Identity
Device Setup
Basic Config
Volume Config
I/O Config
Local Display Config
Advanced Config
Factory Config
SP-ORI-650 Transmisor Magnetostrictivo Jupiter
Blocking Distance:
0 to 50 feet
(0 m to 15 m)
Minimum Separation:
0 to 28 inches
(0 cm to 71 cm)
Zero Offset:
-50 to 50 feet
(-15 m to 15 m)
Level Trim:
-2 to 2 feet
(-0.6 m to 0.6 m)
Failure Alarm Delay:
0 to 5 sec
Sensitivity:
0 to 255
Theshold Settings
Analog Output
New User Password:
0 to 599999
Reset Parameters
CONFIG CHANGED
Probe Properties
Modelo JM4
®
Lvl Thresh Mode:
Auto Largest
Fixed Value
Sloped
Lvl Sloped Start Value:
17 to 239
Lvl Thresh Value:
0 to 87
Upr Lvl Polarity:
Negative
Positive
Poll Address:
0 to 63
Analog Output Mode:
Disabled (Fixed)
Enabled (PV)
Fixed Loop Current:
400 to 2000
Adjust Analog Output:
Adjust 4mA
Adjust 20mA
4mA Trim Value (read only)
20mA Trim Value (read only)
Fdbk 4mA Trim Value (read only)
Fdbk 20mA Trim Value (read only)
Indicator Mode:
Enabled
Disabled
Reset Config Changed
Sensitivity (read only)
Reset New Probe Diagnostic
Lvl Thresh Mode (read only)
Lvl Thresh Value (read only)
Upr Lvl Polarity (read only)
21