Panasonic EY4541 Manual De Instrucciones página 10

Ocultar thumbs Ver también para EY4541:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 79
18) Remove the battery pack from the
tool body before replacement of
the blade, making adjustments,
or other maintenance work.
19) Wear ear protectors when using
the tool for extended periods.
Symbol
V
n
0
Revolutions or reciproca-
-1
...min
Ah
injury, user must read
and understand instruc-
WARNING:
• Do not use other than the Pana-
sonic battery packs that are de-
signed for use with this rechargea-
ble tool.
• Panasonic is not responsible for
any damage or accident caused
by the use of the recycled battery
pack and the counterfeit battery
pack.
• Do not dispose of the battery pack
in a fire, or expose it to excessive
heat.
• Do not drive the likes of nails into
the battery pack, subject it to
shocks, dismantle it, or attempt to
modify it.
• Do not allow metal objects to
touch the battery pack terminals.
• Do not carry or store the battery
pack in the same container as
nails or similar metal objects.
• Do not charge the battery pack in
a high-temperature location, such
as next to a fire or in direct sun-
light. Otherwise, the battery may
overheat, catch fire, or explode.
• Never use other than the dedi-
Meaning
Volts
Direct current
No load speed
tions per minutes
Electrical capacity of
battery pack
To reduce the risk of
tion manual.
For indoor use only.
cated charger to charge the bat-
tery pack. Otherwise, the battery
may leak, overheat, or explode.
• After removing the battery pack
from the tool or the charger, always
reattach the pack cover. Otherwise,
the battery contacts could be
shorted, leading to a risk of fire.
• When the Battery Pack Has Dete-
riorated, Replace It with a New
One. Continued use of a dam-
aged battery pack may result in
heat generation, ignition or bat-
tery rupture.
III. ASSEMBLY
WARNING:
To reduce the risk of injury, always
remove battery pack before changing
the blade.
Inspection before use
• Has the correct jigsaw blade been
attached for the object to be cut?
• Has the correct stem shape and
thickness
mounted?
• Check if the blade is fixed securely?
• Check if the blade is cracked or broken.
• Check that there are no foreign objects
in the object to be cut.
Installing and removing the blade
Installation
1. Wipe away any cutting dust from the
blade and the blade clamp bracket.
2. Lift up the blade Attach/Remove lever.
- 10 -
of
the
blade
been

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ey4541x57

Tabla de contenido