Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17
Dear Customer,
Before using the appliance, the user should
read the following instructions carefully..
Connection to the mains supply
Make sure that the supply voltage
corresponds with the voltage marked on the
rating label. This product complies with all
binding CE labelling directives.
Main unit and accessory components
Rotary control switch 0 / I / II
1.
Pulse switch P
2.
3.
Housing
4.
Drive shaft
5.
Insert mounting
6.
Spatula
7.
Grater insert
8.
Slicer insert
9.
Bowl
10. Pestle
11. Lid
12. Chopping/mincing blade
13. Kneading insert
14. Potato grater
Important safety instructions
Do not operate if the appliance, its
power cord or any of the accessories
show any signs of damage.
Do not leave the appliance unattended
while in use.
This appliance is not intended for use by
any person (including children) with
reduced physical, sensory or mental
capabilities, or lacking experience and
knowledge, unless they have been given
supervision or instruction concerning
the use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure
that they do not play with the appliance.
The attachments designed for cutting,
slicing and grating have extremely sharp

Food Processor

blades. To prevent the possibility of
severe injury, use extreme care when
handling or cleaning these attachments.
Always use the pestle to feed food into
the bowl. Under no circumstances use
your hands.
Do not let the appliance run empty.
Do not touch any moving parts during
operation - this can be extremely
dangerous.
Always switch the appliance off and
remove the plug from the wall socket
before adding, changing or removing
any attachments. After switching off,
always wait until the motor has come to
a complete standstill.
This appliance should only be used with
the attachments provided by the
manufacturer and in accordance with
the purposes described in this manual.
Always switch the appliance off after
use and remove the plug from the wall
socket, and also
- in case of any malfunction and
- before cleaning.
When removing the plug from the wall
socket, never pull on the power cord.
No responsibility is accepted if damage
results from improper use, or if these
instructions are not complied with.
This appliance is intended for domestic
use only and not for commercial
applications.
In order to comply with safety
regulations and to avoid hazards, repairs
of electrical appliances must be carried
out by qualified personnel, including the
replacement of the power cord. If
repairs are needed, please send the
appliance to one of our customer service
departments. The addresses can be
found in the appendix to this manual.
Operation
Control panel
- The rotary control switch has the
following settings:
I
The unit is switched on; low
operating speed
8

Publicidad

Tabla de contenido
loading

Tabla de contenido