Blackmagic Design Teranex Mini Instrucciones De Funcionamiento página 54

You can bypass channels or channel pairs if you want to avoid overwriting audio in your
SDI signal.
Your Teranex Mini will retain its last settings whether applied via switch, Smart Panel or
Blackmagic Teranex Setup. If reverting to switch control after removing the Smart Panel or
updating your converter's settings via software, you may need to toggle individual switches
for new settings to take effect.
Teranex Mini Smart Panel Settings
If you have installed the optional Teranex Mini Smart Panel on your Audio to SDI 12G converter,
the following menus will be available – 'audio,' and 'network.' The settings available in these
menus are identical to those detailed in the 'Blackmagic Teranex Setup settings' section above.
For more information on changing settings using the Teranex Mini Smart Panel, refer to the
'changing settings' section in this manual.
Using Teranex Mini Smart Panel gives you access to
the same settings as Blackmagic Teranex Setup.
Teranex Mini Audio to SDI 12G Block Diagram
Input automatically
detects between
SD/HD/6G/12G-SDI
SDI In
Central Processor
USB
and Firmware
Ethernet
Mini Switches
with Power
Teranex Mini – 12G–SDI to Quad SDI
Teranex Mini 12G-SDI to Quad SDI lets you convert a 12G-SDI signal to quad link SDI so you can
connect to Ultra HD equipment that use four separate BNC connectors. This conversion is
perfect if you need to connect 12G-SDI Ultra HD signals to four separate HD monitors, for
example large video wall displays. Your Teranex Mini includes a 12G-SDI loop through
connector and support for both level A and level B 3G-SDI equipment.
Serializer and
SDI Cable Driver
Equalizer,
SDI Audio
Re-Clocker and
Embedder
10 bit De-Serializer
Analog or AES/EBU
Analog or AES/EBU
AES/EBU
Audio Sample Rate
Converter
Analog
Stereo Audio
Analog to Digital
Converter
Digital
Teranex Mini – 12G–SDI to Quad SDI
Embedded
SDI Out
Ch 1 Analog or
Ch 1&2 AES/EBU
Ch 2 Analog or
Ch 3&4 AES/EBU
or Timecode
L
Stereo In
R
Optical In
54