Makita CF101D Manual De Instrucciones página 10

CAUTION:
• When oscillating the fan head, keep obstacles clear of the moving range of the fan head. The cordless fan may be
pushed and fall by the oscillation.
• Do not stop the oscillation by holding the fan head. Always push the oscillation button to stop.
NOTE:
Depending on the fan head position, the fan head may not oscillate soon after the oscillation button is pushed
because of the oscillation mechanism.
Auto-off timer (Fig. 9)
Push the auto-off timer button (3) while the fan is running. The duration to activate auto-off timer changes every time
you push the button (1 hour / 2 hours / 4 hours / off).
The number under each auto-off timer indicator shows the remaining hour(s) to turn off the fan. The auto-off timer
indicator will turn off with time.
NOTE:
Depending on the battery cartridge type and its remaining capacity, the auto-off timer may be activated earlier than
the set time.
Hanging the fan (Fig. 10)
Use the hook (10) on the handle to hang the cordless fan on a pole or other usable places. To prevent the cordless
fan accidentally dropped, attach a strap using the strap hole (7) and secure it.
CAUTION:
• Never hook the cordless fan at high locations or on the surfaces where the appliance may lose the balance and fall.
• For hanging the cordless fan, use a hard material such as a metal pole. The diameter of the hooking pole should be
smaller than 24 mm and withstand 8.0 kg. Do not hang the cordless fan higher than 2.3 m.
Mounting on a tripod (Fig. 11)
The cordless fan can be mounted on Makita tripod.
When using the tripod with the threaded shaft 5/8"-11 UNC, mount the cordless fan using the screw hole (18).
Using AC adaptor (optional accessory)
WARNING
• Never use the cordless fan when the cord or plug is damaged.
• Do not handle the plug with wet or greasy hand.
• Do not leave the AC adapter disconnected from the cordless fan while the power is supplied from the mains. Small
children may put the live plug in their mouth and cause injury.
Insert the 12V DC plug of AC adaptor into the 12V DC socket (Fig. 1, 2), and then plug the AC pins into a main power
supply. Make sure that the voltage rating of the main power supply corresponds with that of the adaptor.
NOTE:
• After the AC adaptor is connected, the cordless fan may take 3–5 seconds to start.
• The adaptor might creak while using it for the power supply. This doesn't affect normal use.
• The AC adapter does not charge the battery inserted to the cordless fan.
MAINTENANCE
WARNING
• When servicing, ask Makita authorized service centers and with only identical replacement parts. Use of any other
parts may create a hazard or cause product damage.
• To avoid serious personal injury, always remove the battery cartridge or AC adapter (optional accessory) from the
unit when cleaning or performing any maintenance.
• Allow the cordless fan to cool completely before performing any inspection, maintenance, cleaning procedures or
storage.
10