Kenwood TK-2402 Manual De Instrucciones página 4

Thank You
We are grateful you have chosen KENWOOD for your
land mobile radio applications.
noTices To The user
◆ Government law prohibits the operation of unlicensed radio
transmitters within the territories under government control.
◆ Illegal operation is punishable by fine and/or imprisonment.
◆ Refer service to qualified technicians only.
Safety: It is important that the operator is aware of, and
understands, hazards common to the operation of any
transceiver.
Terminal Descriptions
Speaker/ Microphone Jacks
It is possible to use a resin-based cover for the Speaker/ Microphone jacks.
NO. Name
1 PTT / RXD External PTT Input / Serial Data Input
2 MIC
3 MICIN
4 OPTDET
5 5M
6 AE
7 TXD
8 NC
9 SPO
10 SPI
Antenna Terminal
50 Ω impedance
Battery Terminal
The battery terminal uses a spring plate.
The negative terminal connects to the chassis ground.
The battery is mounted on the rear side of the transceiver using a latch
mounting method.
Firmware Copyrights
The title to and ownership of copyrights for firmware embedded in
KENWOOD product memories are reserved for JVC KENWOOD
Corporation.
Description
External MIC Input
Internal MIC Output
External Option Detect
5V Output
GND
Serial Data Output
No Connection
Audio Input
Received Audio Output
Impedance
CMOS
1.8 kΩ
1.8 kΩ
High Impedance
100 Ω
GND
CMOS
−
8 Ω
8 Ω
I/O
I
I
O
I
O
−
O
−
I
O