Connecting The Unit; Connecting To A Vcr - Sony VPL-VW5000 Manual De Referencia

Step 3
When making connections, be sure to do the following:
• Turn off all equipment before making any connections.
• Use the proper cables for each connection.
• Insert the cable plugs properly; poor connection at the plugs may cause a malfunction or poor picture quality. When
pulling out a cable, be sure to pull it out from the plug, not the cable itself.
• Refer to the operating instructions of the connected equipment.

Connecting to a VCR

Right side of the unit
: Video signal flow

Connecting the Unit

HDMI cable (not supplied)
Use a Premium High Speed HDMI cable on which the cable type logo
is specified.
Equipment with HDMI output connectors
AV amplifier
to HDMI output
Connecting the Unit
Speakers
13
GB