Resetting The Radio - Eton SATELLIT Manual De Instrucciones

SATELLIT OWNER'S MANUAL

RESETTING THE RADIO

If the radio has malfunction, the user should disconnect the power
supply and then connect the power again to reset the radio. Or use
sharp toothpick or paperclip to quick press RESET hole to reset the
radio.
If the user wants to set factory default, press and hold down
button, and at the same time, quick press RESET hole until
"RESET..." appears in the LCD, then release
seconds and reset factory default, all memory pages are erased
and the factory default settings are restored.
ADJUSTING THE BRIGHTNESS LEVEL OF BACKLIGHT
With the radio off, quick press LIGHT/EDIT button to select the
brightness level of backlight: high-medium-low-off.
If no buttons are pressed within 10 seconds the backlight will go
to sleep mode, the brightness setting of the backlight will default
to off unless set to a different value by the user.
The first press of any button will activate the backlight, the second
press of the same button will actuate the function for that button.
ACTIVATING THE SLEEP TIMER
To set the sleep timer, in minutes, perform the following steps in
one continuous action.
1. With the radio OFF press the power button
2. Using the keypad, enter the number of minutes you would like
the radio to play before shutting off
3. Press the power button again. The word SLEEP - XX will be
shown on the display and the Sleep icon will illuminate in the
upper right corner of the screen.
DISPLAY CURRENT SLEEP TIMER SETTING
With the radio on, press and hold
countdown of sleep timer. If "ON" is displayed, it means there is no
sleep timer setting.
TUNING
Band selection
1. Quick press FM/AIR BAND button to select FM or AIR band
2. Quick press LW/MW BAND button to select LW or MW band
button to display the
10
button for 3