Storing Stations Into Memory - Eton SATELLIT Manual De Instrucciones

Press and hold
button, store the station to page (99~1) automatically, 7
memory locations for each page. Press any button to stop auto
tuning in ATS mode.
Rotate Tuning
With the radio on, quickly press in the tuning knob to select
FAST/SLOW/FINE:XX (for SSB)/STOP to select tuning step, the
corresponding icon will be displayed in the LCD list below:
Step | Band FAST
FM 100K
LW 3K
MW 9K/10K
SW 5K
AIR 25K
Direct key in frequency
Quick press numeric button 0~9 to enter the desired frequency
If the input frequency is FM or AIR band, quick press FM/AIR
BAND button to confirm. If the frequency is LW/MW/SW band,
quick press AM/METER BAND button to confirm.
For example: FM 107.5MHz, quick press
that order.
If the key in is incorrect, the LCD will display "ERROR"; If the
frequency is not completed then confirm, the system will
confirm "0" for missing numbers. For example, quick press
FM/AIR BAND button, the radio will switch to FM band at
100MHz.

STORING STATIONS INTO MEMORY

The Satellit has 700 memories (also called presets), arranged
in 100 pages (0~99), with each page holding 7 memories.
Buttons F1-7 represent memory locations.
Note that when storing into an already occupied memory
station, its contents will be replaced with your new entry.
1. Turn on the radio and tune to the desired station;
2. Quick press PAGE/TIME button to select MEMORY mode;
3. In memory mode, quick press
memory page; Or press numeric buttons (0~9) to direct key
in page number and press PAGE/TIME again when finished;
4. Store the frequency by pressing one of buttons F1-7 for 2
seconds. Note that when the selected location is flashing,
or button to enter ATS then release this
SLOW
10K
1K
1K
1K
1K
FINE(SSB)
N/A
SSB fine tune (-99~+99)
SSB fine tune (-99~+99)
SSB fine tune (-99~+99)
N/A
or to select the desired
13
SATELLIT OWNER'S MANUAL
STOP
Stop tuning
Stop truning
Stop tuning
Stop tuning
Stop tuning
in