Eton SATELLIT Manual De Instrucciones página 16

SATELLIT OWNER'S MANUAL
6. To continue to erase other memory pages, just repeat the
process.
7. Press PAGE/TIME to exit delete mode.
8. If you want to delete the contents of all memory pages, you
must RESET the radio. Resetting the radio deletes all memories
and resets the radio to factory default.
9K/10K AM(MW) STEP SELECTION/FM FREQUENCY
RANGE.
LCD displays:
MW-9K indicates MW step at 9kHz
MW-10k indicates MW step at 10kHz
FM-64.0M indicates FM frequency range is 64.0-108MHz
FM-76.0M indicates FM frequency range is 76.0-108MHz
FM-87.0M indicates FM frequency range is 87.0-108MHz
FM-87.5M indicates FM frequency range is 87.5-108MHz
With the radio off, press and hold
"MW-9K" or "MW-10K", then quick press
tuning knob to switch between 9K or 10k, then quick press PAGE/
TIME button to confirm 9k/10k mode. The LCD displays "FM-
87,5M" or "FM-76.0M" or "87.0 -108M" or "64-108MHz", quick press
button or use the tuning knob to switch the selection of FM
frequency. Quick press PAGE/TIME button to exit.
FM STEREO/MONO SELECTION
1. Turn on the radio and select FM band
2. Quick press WIDE/STEREO button, LCD displays "AUTO", which
means FM station in STEREO mode, if the Satellit detects
stereo station, "STEREO" will display in the LCD, versus
displaying "MONO".
3. Quick press NAR/MONO button, LCD displays "MONO",the
station will be listening in MONO mode only.
AM/VHF AIRCRAFT BANDWIDTH SELECTION
1. Turn on the radio and select MW or VHF aircraft band
2. Quick press WIDE/STEREO button or NAR/MONO button to
switch different bandwidth, the LCD displays "BW XK", e.g. "BW
3K" indicates the bandwidth is 3kHz.
button, the LCD displays
button or use the
16