Brita Redi-Twist USS-301 Manual De Instalación página 9

direct connect to kitchen faucet
Filter Replacement
(every 6 months)
1/4 turn
For FREE Filter Replacement
Reminder, go to
www.protectplus.com
Note: Place paper towels or rag under the filter
system to catch any water drips.
• Using the Filter Housing Wrench,
turn the filter right to left until it
releases. Remove and discard used
filter.
• Flush the filter with running water for
approximately 10 minutes. See step 3
for details.
• See page 8 for inserting new filter.
• Note date filter is installed on
cartridge tank label.
System
USS-301 Redi-Twist™
Drinking Water Filtration System
Replace filters every six months or when capacity
is reached.
Replacement Parts
Part Number
WFBAS-300
WFBAF-850
WFBAF-375
WFBAF-100
FCT-102
USS-301 installation instructions USS-301 installation instructions
direct connect to kitchen faucet
Use and Care
Brita Redi-Twist
® ™
Usage and quality of water in your incoming
water line affect the life of filter cartridges.
Cartridges should be replaced sooner if
water pressure at the faucet begins to drop
noticeably or if the filter fails to perform
satisfactorily.
Changing water filter on a regular
basis ensures optimum performance
of the water filtration system.
After prolonged periods of non-use, it
is recommended that the filter system
be flushed thoroughly. Let water run
for 10 minutes before using.
The Redi-Twist
filter system has a limited service
life. Changes in taste, odor, and/or flow
of the water being filtered indicate that
the filter should be replaced.
Please see the Performance Data Sheet
for the certified performance of specific
systems with stated cartridges.
Filter Model Numbers
USF-201 - Level 1 filter (included with system)
Capacity: 2,000 gallons
USF-202 - Level 2 filter
Capacity: 500 gallons
Description
Mounting Screws (Package of 2)
Dual Port Kitchen Faucet Adapter
3/8" Plastic Tubing
Redi-Twist™ System Head
Filtered Water Faucet - Chrome
Filtration System USS-301
filter used with this
TM
Version 2.0A
9 9