Stihl MS 461 Manual De Instrucciones página 36

English
Starting the chain saw
Decompression valve
Press the button, the
N
decompression valve will be
opened
The decompression valve is closed
automatically when the engine starts for
the first time. For this reason, press the
button again before each additional
starting procedure.
There must not be anyone within the
swivel range of the chain saw.
34
0
1
Push the hand guard (1) forwards –
N
the saw chain is blocked
Simultaneously press the throttle
N
trigger lockout (2) and throttle
trigger (3) – set master control lever
Position cold start l
If engine is cold (even if the engine
–
has stalled during opening of
throttle after starting)
Position warm start n
If engine is warm (once the engine
–
has been running for approx. one
minute)
Hold and start the chain saw
N
When the engine has turned over for the
first time
2
Move the Master Control leve (1) to
N
the position warm start n
3
Press the button on the
N
decompression valve
Hold and start the chain saw
N
Once the engine is running
Blip the throttle trigger (2); the
N
Master Control lever (1) jumps to
run F and the engine begins to idle
1
1
2
MS 461